Cleanliness is mandatory, and it doesn’t matter what equipment it is. All the things can clean, and you should do it. Dirt not only makes things look bad, but they also do interfere in the performance and reduces the lifespan.
Cleaning a fishing rod isn’t a tough job at all. It is straightforward. But it would be best if you had the appropriate way of cleaning. So if you are here for an easy guide on fishing rod cleaning, you are on the sweet spot; a brief and practical guide for you.
Cleaning Items You Will Need
There are many items that you will be needing when it comes to cleaning a rod. But the satisfying part is, all these items you can find at home. So you don’t need to spend extra. Here are the things.
- A Towel
- Small screwdrivers.
- Toothpick.
- Tweezers (One Pair).
- Used tooth Brush
- Small wrench.
- Rod cleaning solution
There are different kinds of rod cleaning solutions, but if you need suggestions, then I would say go for the Ardent Reel Kleen or Penn Rod Cleaner. However, please go for a whole cleaning kit; that would be a win because you will get all the necessary cleaning items inside the Kit.
Ardent Rod Cleaning kit is a top-rated cleaning kit; you can go for that. However, if you can’t or don’t want to buy a cleaning solution, you get away with any fluid used to pull off heavy grime.
Cleaning Process for How to Clean a Fishing Rod
Did you get all the items? Then it’s time to start the cleaning. Rod cleaning is very straightforward. Fishing rods don’t have much to dissemble. If there is a reel attached, you need to put it away.
Start cleaning from the tip of the rod and clean down to the handle. Check all the guides, see if there is weed buildup; if you see so, clean thoroughly. Check the line guides for rust. If you see rust, you should change the guide.
Because rust will damage the line, or if you have good knowledge, you can remove the rust as well. Even if you have no prior knowledge, don’t worry ! Please watch this video
For weed buildup, you can use a soft brush or Q-tip on the guides. Please clean thoroughly; otherwise, you might end up losing a big catch.
Some People do not focus much on the rod cleaning; they don’t even think of cleaning the rod. However, if you have invested good money on a rod, you should take care of it unless you are a millionaire.
Even if you are a millionaire, you should take good care because you have money, that doesn’t mean you have to waste it for no reason.
How to Clean a Saltwater Fishing Rod?
You have to take care of a saltwater fishing rod more than a freshwater rod because salt harms more.
Saltwater fishing items develop in a way that they can withstand saltwater abuse. But still, you need to care for them. The best practice for keeping the saltwater fishing rod in good condition is to clean it after every fishing trip.
Remove the peel and remove the line from the line guides. And with a light cleaning solution and warm freshwater, clean the rod thoroughly.
Make sure you clean all the salt buildup. With an old used toothbrush, you can scrub the rod for better results.
Handle Cleaning
When the rod handle is extremely dirty, it doesn’t provide the needed grip; as a result, you find controlling the rod and hooked fish rigid.
So make sure you keep the handle clean. For cleaning, you can use alcohol. With alcohol, scrub the handle and wipe it properly. It should get cleaned enough.
Conclusion
I have explained the easiest way of how to clean a fishing rod. Whether it is baitcasting rod, Spinning rod, Jigging rod, Trolling rod, fly fishing rod, or any other rod, you can follow this method.
Happy Fishing !
If you are interested in spending more time, please watch the below video for fishing gear cleaning.